How To Refinish Stained Concrete Floors?

Can stained concrete floors be restained?

To change the color, we’re covering the two most common solutions here: You can re- stain the floors (by applying a new penetrating sealant) or paint them (by applying an industrial coating).

How do I get my stained concrete to shine again?

Stained concrete floors are easy to clean and keep shiny.

  1. Sweep your floor. Use a dustmop to avoid damaging the surface of your stained concrete floor.
  2. Mop your floors. Use a damp mop for occasional cleanup.
  3. Seal your floors.
  4. Wax your floors.
  5. Avoid scuffing your floor.
  6. Maintain your shiny floors.

How much does it cost to Restain concrete floors?

Typically, staining concrete costs between $7 and $15 per square foot. Contractors charge between $2 and $4 per square foot for a simple stain job and between $12 and $25 per square foot for a high-end design.

You might be interested:  Question: How To Get Water Stains Off Concrete Floor?

How do you remove concrete stains from concrete?

Answer:

  1. Use a pressure washer to remove all solid leaf matter or debris from the concrete.
  2. Apply an organic detergent (as recommended above) to damp concrete. Let it sit for a few minutes.
  3. Scrub vigorously with a stiff broom or scrub brush.
  4. Rinse the concrete with water until you remove all the soap.

Which is better epoxy or stained concrete?

Both stained concrete and Nature Stone flooring will last for years with proper care, but stone epoxy tends to be slightly more durable than stained concrete. The reason for this is because the sealant used on top of stained concrete wears down faster than stone epoxy.

Why is my stained concrete turning white?

Why is my concrete turning white? Efflorescence is a white salty residue caused when too much moisture is moving through the concrete. As the concrete dries and its moisture rises upwards through the slab, it brings salts within the concrete to the surface as well.

What is the best cleaner for stained concrete floors?

For most concrete floors, you can use a mixture of flour and hydrogen peroxide or water and trisodium phosphate. But for stamped concrete floors or polished concrete floors, you’ll want to use a gentler solution. If your indoor concrete flooring is stamped, use a mop and mix water and a mild cleaner in a bucket.

Can you polish acid stained concrete?

Yes, acid stained concrete can be polished. Acid – staining is a permanent change to your concrete so even the grinding involved in polishing will not remove the color.

You might be interested:  How To Level Uneven Concrete Sidewalk?

Can I use Mop and Glo on stained concrete?

Waxing Products and Concrete Flooring Not all types of concrete flooring will benefit from this treatment, but high gloss polished flooring and some types of stained concrete flooring will. Do not use cheap wax-cleanser combination products, such as Mop -n- Glo and other products available at your local grocery store.

Is it better to stain or paint concrete floors?

Concrete stain embeds the surface to color it translucently, while opaque concrete paint covers the top of the concrete but is subject to chipping and peeling when improperly applied. Concrete stains go on quicker, dry faster and take less work than concrete paint, but they offer no significant protection.

How long does stained concrete last?

With stained concrete, the concrete itself will last for many years, potentially over 100 years. However, in order for the stain to last, the floors will need to be sealed or waxed once or twice per year.

Does stained concrete increase home value?

Getting concrete floor coatings or a decorative concrete overlay is not a luxury – it’s an investment that can pay off over time. Not only will the investment improve your enjoyment of the home and reduce your maintenance, but it will also improve the value of your home.

Does white vinegar clean concrete?

Yes. Vinegar makes a great cleaner for stained concrete floors. Because of its acidity, you should dilute it 50/50 with warm water to avoid damaging the floors. However, you can use small amounts of full-strength vinegar for touch stains, followed by a quick water rinse.

You might be interested:  FAQ: How To Make Foam Agent For Concrete?

How do you lighten dark stained concrete?

If the desire is to lighten the color, the best results I have seen come from pulling some of the initial stain out of the concrete. By using the carrier on which the stain is based (water, acidic water, acetone, alcohol, etc.), you can usually pull some or all of the color back out.

How do you get water stains off of concrete?

In most cases, a mildly acidic cleaner combined with some scrubbing can remove these stains without etching concrete. Fill a spray bottle with equal parts white vinegar and water. Spray the water spots thoroughly with the vinegar solution, saturating them completely. Let it sit for five minutes.

Leave a Reply

Your email address will not be published. Required fields are marked *