FAQ: How Do You Figure Out Concrete Yardage?

How many yards of concrete do I need calculator?


Multiply the length by the width to determine square footage. Convert the thickness from inches to feet. Multiply the thickness in feet by the square footage to determine cubic feet. Convert cubic feet to cubic yards by multiplying by.037.

How much concrete do I need for a 10×10 slab?

For a 10 x 10 slab, we’d suggest a mix with a capacity of about 4,000 pounds per square inch, or psi. This is basic for residential projects, and it can withstand traffic and support heavy loads.

What is a yard of concrete?

One Cubic Yard of Concrete: 4-inches thick – covers 81 square feet. 5-inches thick – covers 65 square feet. 6-inches thick – covers 54 square feet.

You might be interested:  How To Redo Concrete Steps?

How do you calculate cubic meters of concrete?

Multiply the width, length and depth of your area. Concrete is usually ordered in cubic metres. Here’s a conversion guide. There are 1.3 cubic yards in one cubic metre (If you have your requirement in cubic yards, all you need to do is divide by 1.3 to get the cubic metres answer).

How much does 2 yards of concrete cost?

According to the NRMCA – Ready Mixed Concrete Industry Data Survey, the average cost of concrete in 2018 was $120 per cubic yard, or $240 for the 2 cubic yards needed for a typical 10-by-10-foot patio.

Bulk Concrete Prices.

Cubic Yards Price Range
1* $140-$200
2* $280-$400
3* $420-$600
4* $560-$800

How many bags of cement do I need for 100 square feet?

Ans.:- 7.6 no of cement bags (381.30 kgs) are required for 100 sq ft rcc roof slab 4 inch thick m20 grade concrete. Ans.:- 7.6 bags (381.30 kgs), 9.5 bags (476.10 kgs) & 11.4 bags ( 570.8 kgs) cement are required for 100 sq ft rcc roof slab 4 inch, 5inch & 6 inch thick respectively in m20 grade of concrete.

How many square feet does a 80lb bag of concrete cover?

4 sq feet in that amount of cement.

How thick should my concrete slab be?

Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.

You might be interested:  How To Carve Concrete?

How many square feet is in a 60 pound bag of concrete?

A 60 lb. bag provides 0.45 cubic feet of cured concrete.

How much is 4 yards of concrete cost?

Each cubic yard of concrete costs $119 to $147 per cubic yard delivered.

Short-Load Concrete Prices.

Cubic Yards Mixing On-site Fees
4 – 4.75 $80
3 – 3.75 $90
2 – 2.75 $100
1 – 1.75 $110

How much does it cost to pour a 12×12 concrete slab?

How much does a 12×12 concrete slab cost? The average cost to pour a 12×12 concrete slab that is 4” thick is between $888 and $1,584, with professional labor and materials included.

How much concrete do I need for a post hole?

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.

How many bags of cement do I need for 1 cubic meter?

Batching by volume – DIY

Materials 0.2 m3 concrete 1 m3 concrete
cement (no. 25 kg bags) 2.5 12
all-in aggregate (volume in m3) 0.25 1.3
water (volume in litres) 32 160
cement (no. 25 kg bags) 3.5 14

How much is 1m3 of concrete?

Ready-mixed concrete is sold by the volume, so it’s essential to know the area you’re filling. The price of concrete depends on many factors, including where you’re located and the type you’ve ordered. However, in general, you should be looking at a cost of between £65 and £85 per cubic metre.

What is the cost of 1m3 of concrete?

Ready Mix Concrete, Grade Standard: M10 To M50, Cubic Meter, Rs 3400 /cubic meter | ID: 13959816473.

Leave a Reply

Your email address will not be published. Required fields are marked *