- 1 Can you build a deck over a concrete slab?
- 2 Do I need footings for a ground level deck?
- 3 Can I build a deck directly on the ground?
- 4 Can you screw decking straight to concrete?
- 5 How do you attach wood to concrete without drilling?
- 6 How do you attach 2×6 to concrete?
- 7 Can you cover concrete porch with wood?
- 8 How do you attach pressure treated wood to concrete?
- 9 Why deck posts should not be set in concrete?
- 10 How many footings do I need for a 12×16 deck?
- 11 How high should decking be off the ground?
- 12 How do you prepare the ground under a deck?
- 13 What do you put under ground level deck?
- 14 Can pressure-treated wood touch the ground?
Can you build a deck over a concrete slab?
Even if your patio is in terrible shape, you can deck over it. Cracks, craters and seasonal movement along cracks are no problem. (depending on the thickness of your decking and whether or not you put spacers under the sleepers). So any door thresholds adjoining the patio must be at least that far above the concrete.
Do I need footings for a ground level deck?
If you want to expand your outdoor living space, a ground level deck might be your best option. Since it’s not connected to a house, it can go anywhere in your yard and doesn’t require deep footings. Because it rises just inches above ground, it doesn’t need stairs or railings.
Can I build a deck directly on the ground?
Floating decks can be set directly on the ground or, preferably, a bed of gravel. But it’s best to support the deck on concrete blocks. This keeps the wood off the ground and away from moisture so the wood stays drier and lasts longer.
Can you screw decking straight to concrete?
Yes, you can lay or install composite decking on concrete if your want to.
How do you attach wood to concrete without drilling?
If you are willing to make holes in the concrete but do not want to buy the particular drill bit needed, then the simplest solution is to get nails for your project. Standard nails will not work on concrete, but some nails are made specifically for nailing wood to concrete. Cut nails will also work for this as well.
How do you attach 2×6 to concrete?
Tapcon screws will be your easiest and cheapest means to mount a 2×6 to a concrete floor, by far. They will require a hammer drill to drill the holes in the concrete, but you can rent one from the store if you don’t have one. You could also use concrete expansion anchors too.
Can you cover concrete porch with wood?
Covering your concrete porch with wood provides a warmer feel. Covering a concrete porch with wood provides a warmer, cozier feel. It is also a good way to cover up peeling paint, slight chipping and discolored concrete. Whatever your reasons, adding a wood floor to your concrete porch is a fairly simple operation.
How do you attach pressure treated wood to concrete?
There are many different ways you can adopt to attach a pressure–treated piece of wood to concrete. Each one follows a similar process: open/drill a hole in the concrete and wood, then insert the fastener piece and tighten up. This is not as easy as it sounds, but it won’t be too challenging, either.
Why deck posts should not be set in concrete?
A deck post should always be placed on top of footing, not inside concrete because it can break. Concrete tends to absorb moisture and wood expands when it gets wet, so these two factors combined will result in the wood breaking the concrete.
How many footings do I need for a 12×16 deck?
A standard deck will need four footings parallel to the house, but they will need to be temporarily braced by 6 inch-by-6 inch posts. Using doubled boards, you will then need to build beams on the top row of the posts to frame the edges of the deck. These must be topped with adjustable post caps.
How high should decking be off the ground?
Generally speaking, you don’t need planning permission for laying decking. However there are a couple of scenarios when you should contact your local council. If the decking will be more than 30cm above the ground.
How do you prepare the ground under a deck?
To suppress the growth of unwanted vegetation underneath the deck, the area should be covered with landscaping fabric. First, add a layer of coarse sand for drainage. Then cover the sand with landscaping fabric. Bury the fabric under several inches of gravel.
What do you put under ground level deck?
If the bottom of your deck frame is less than 6″ above the ground or partially buried, you should use pressure-treated wood that is rated for ground contact. This type of wood has a higher level of preservative that guards the wood against rot and decay.
Can pressure-treated wood touch the ground?
Ground-contact pressure–treated lumber can be used either above ground or in contact with the ground. Has twice the level of chemical retention and protection compared to above-ground treated wood.