FAQ: How To Polish Concrete Diy?

Can you polish concrete yourself?

To polish concrete the do-it-yourself way, you‘re going to need a concrete grinder. Before burnishing one last time, put a thin coat of concrete sealer over the floor. The result will be a stone-like surface that gleams without the aid of floor waxes or oils.

What tools do you need to polish concrete?

The most essential equipment required for a perfect concrete polished floor are:

  1. Grinders and Polishers:
  2. Diamond Tools for Grinding and Polishing:
  3. Industrial Floor Vacuum:
  4. Hardening and Compacting Agents:
  5. Enhancing the Floor with Coloring Agents, Dyes and Stains:

How do you polish outdoor concrete?

Apply non-stick concrete sealant and allow it to dry. Use a 60-grit resin pad to polish the patio surface. Successively switch to finer grit pads to achieve a shine. Apply polishing compound onto the entire patio surface.

Can any concrete floor be polished?

Almost any structurally sound concrete floor, whether new or old, can be polished. However there are some exceptions, for example with new floors no special mix design is required to achieve good results – although the floor should be in place at least 28 days before polishing begins to ensure adequate curing.

You might be interested:  Quick Answer: What Thickness Plastic Under Concrete?

How do you make concrete smooth and shiny?

To achieve a smooth and shiny concrete finish first requires proper leveling, floating, and troweling before it cures. After attaining a relatively smooth concrete surface, and once the concrete is dry, you can utilize either mechanical or chemical polishing methods to achieve a nice, glossy shine.

How do you hand polish concrete?

First Grind

For your ground finish, sand concrete with a low grit pad, usually around 60 grit. Polish evenly, until you have a uniform amount of aggregate exposed on the wet concrete before moving to the next pad. To light polish, start at 200 grit. Tape off areas you don’t want polished.

How do you keep polished concrete floors shiny?


  1. Dust mop the floor daily with a microfiber pad to keep dirt particles off the floor.
  2. If wet mopping the floor, always use clean water and clean mops.
  3. When wet mopping, use a neutral floor cleaner formulated to suspend the dirt particles so they can be more easily removed.

Can you polish concrete with sandpaper?

Whereas with wood, you use sandpaper, with concrete polishing you use special diamond-segmented abrasives. As with wood, you use gradually finer abrasives to give a smooth, glossy, mirror-like finish. Concrete can be polished using either a wet or dry method.

Can I use an angle grinder to polish concrete?

An angle grinder can be used to level, smooth and polish concrete by grinding it down. They can also be used to remove paint and floor adhesives. To grind concrete with a angle grinder you need a diamond cup wheel, a dust shroud attachment, and a vacuum cleaner.

You might be interested:  FAQ: How To Make Concrete Bench?

Can you sand concrete by hand?

You can basically sand any type of concrete surfaces, regardless of whether it is a countertop, a floor, a wall, or a decorative object. However, be aware that you will need the right tools for the job: you can sand small and comparatively smooth surfaces by hand with regular or diamond sandpaper.

Does white vinegar clean concrete?

Yes. Vinegar makes a great cleaner for stained concrete floors. Because of its acidity, you should dilute it 50/50 with warm water to avoid damaging the floors. However, you can use small amounts of full-strength vinegar for touch stains, followed by a quick water rinse.

Can you polish rough concrete?

You can polish concrete using wet or dry methods. Although each has its advantages, dry polishing is the method most commonly used in the industry today because it’s faster, more convenient, and environmentally friendly. Wet polishing uses water to cool the diamond abrasives and eliminate grinding dust.

What is the best chemical to clean concrete?

Five Concrete Cleaning Products To Use

  1. Soda. Soda can be used to remove grease stains.
  2. Detergent. This is recommended for smaller grease spills.
  3. Vinegar and Baking Soda. Cleaning concrete with vinegar or baking soda is a good option if you are looking for a natural cleaner.
  4. Concrete Cleaner or Degreaser.
  5. Bleach.

Leave a Reply

Your email address will not be published. Required fields are marked *