FAQ: How To Stain Your Concrete Floor?

Can I stain my concrete floor myself?

A stained concrete floor is a great and durable flooring option, and – good news! – staining one yourself is a surprisingly easy task (although you’ll want to avoid one major pitfall we fell into below).

How much does it cost to stain a concrete floor?

Typically, staining concrete costs between $7 and $15 per square foot. Contractors charge between $2 and $4 per square foot for a simple stain job and between $12 and $25 per square foot for a high-end design.

What is the easiest way to stain concrete?

Dampen the area with water but do not let it puddle. Spray in an overlapping manner, maintaining a wet edge. Allow acid stain to react with the concrete floor for at least 6-hours. Clean residue and pour water on floor to approximate the final color.

Is it hard to stain concrete?

IS IT HARD TO STAIN CONCRETE? Overall, staining concrete can look like a simple process. However, it is important to keep in mind that while your stain is permanent, so are your mistakes.

You might be interested:  Quick Answer: How To Patch Concrete Foundation?

What is the best finish for concrete floors?

Top Concrete Finishing Options

  • Acid Stain. An acid stain for concrete floor has a very bold look, recognizable by its mottled appearance and highly variegated finish.
  • Water-Based Stain.
  • Fast Stain.
  • Acrylic Sealer.
  • Standard Epoxy.
  • Metallic Epoxy.
  • Terrazzo or Granite Epoxy.
  • Quartz Sand Epoxy.

Is stained concrete flooring a good option?

Concrete floors are a great alternative to linoleum, carpet, wood, tile, stone or marble flooring. Concrete can be stained nearly any color, resurfaced in a variety of textures and finishes, or polished for a smooth, shiny look. Plus, concrete flooring is durable, long-lasting and easy to clean and maintain.

Is it better to stain or paint concrete floors?

Concrete stain embeds the surface to color it translucently, while opaque concrete paint covers the top of the concrete but is subject to chipping and peeling when improperly applied. Concrete stains go on quicker, dry faster and take less work than concrete paint, but they offer no significant protection.

Is stained concrete cheaper than wood floors?

For those looking for a durable, showstopper floor, concrete and hardwood both deserve a closer look.

Side-by-Side Comparison.

Concrete Hardwood Flooring
Make-up/Construction Sand, cement, aggregate (sometimes pigment) Solid wood
Installed Cost $2 – 15+ $$$ More than laminate ($12-20)

Can you stain an old concrete floor?

Your existing old concrete should be fine to stain, so long as it is not contaminated with glue, paint, oil, grease, sealers, waxes, or anything else that would prevent the stain from soaking into the pores of the concrete.

You might be interested:  Question: How To Remove Old Paint From Concrete Floors?

What is the cheapest way to stain concrete?

There are products on the market that will paint or resurface concrete but to go cheap, use the least expensive oil base stain or paint you can find. Mix the paint/stain with paint thinner in a 50-50 solution. That is one gallon of paint to one gallon of paint thinner.

How long after staining concrete can you seal it?

Be sure and remove any residue left behind if using our acid stain, then apply sealer. Don’t seal too soon as there could be moisture in the floor and hazing can occur. A good rule of thumb is to wait 24 hours time after any water has been applied to the floor before sealing.

How long does concrete stain last?

With stained concrete, the concrete itself will last for many years, potentially over 100 years. However, in order for the stain to last, the floors will need to be sealed or waxed once or twice per year.

Can I apply concrete stain with a roller?

Use a roller with extension pole or a sprayer to apply concrete stain over the rest of the surface evenly. On exterior surfaces, you can apply a solvent-based, solid-color concrete sealer. These work similarly to stains by penetrating the concrete rather than coating it, making for a more durable finish than paint.

Is stained concrete slippery?

Like any hard, smooth surface, stained concrete can become slippery when wet, especially if it has been coated with a high-gloss sealer. For concrete floors or walkways exposed to moisture or in areas with a lot of foot traffic, there are ways you can increase the slip resistance without affecting the color.

You might be interested:  Readers ask: 1 80 Lb Bag Of Concrete How Many Yards?

How do you seal stained concrete?

Sealing Stained Concrete

  1. Sealing Stained Concrete Floors.
  2. Acrylic Sealers: Acrylics are UV stable, affordable, and easy to apply or reapply, as necessary.
  3. Epoxy Sealers: If your stained floor is high traffic, such as a restaurant or other public space, an epoxy sealer may be a good option.

Leave a Reply

Your email address will not be published. Required fields are marked *