Often asked: How Long Does Concrete Take To Dry For Fence Posts?

Can you pour concrete in the rain for fence posts?

In order to properly install a fence in the rain, don’t simply set your posts in concrete. Doing that could lead to rotting. Instead, for the best results, dig your post holes about 3-5 inches deeper than you usually would and put gravel at the bottom for the posts to rest on. For your concrete, use a dry mix.

Is 2 feet deep enough for fence posts?

Project Instructions



The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

How long should concrete cure before putting weight on it?

After 7 days, the concrete will have gained around three quarters of its compressive strength, but you should refrain from driving vehicles or heavy machinery over the surface until after the 28 day mark. For domestic mixes – driveways, for example – you can expect the concrete to be set within 24-48 hours.

You might be interested:  Question: How To Seal A Metal Shed To Concrete?

How do I keep my fence post straight when concrete is set?

Setting the Post



You need to level it in two directions with a 4-foot level. After getting it straight in the first direction, hold one of the braces against the post and drive a single screw to connect the brace to the post. You can then level and brace the post in the other direction and begin filling the hole.

Can you put dry concrete in a post hole?

Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.

Can I mix quikrete in the hole?

Whether you are building a new fence, setting a mailbox or anchoring a basketball goal or play set, QUIKRETE® Fast-Setting Concrete is the ideal product for the job. With Fast-Setting Concrete there is no mixing or tools required – You simply pour the dry mix right from the bag into the hole, then add water.

How many bags of concrete do I need for a fence post?

Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.

Will wooden posts rot in concrete?

Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. The concrete at the top should be sloped away from the post to grade level to avoid water pooling around the base.

You might be interested:  Question: How To Do Decorative Concrete?

Should I use concrete for fence posts?

Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Using premixed concrete rather than dry concrete will ensure ultimate security. While concrete is sturdy, it lacks the drainage of gravel and can trap moisture, ultimately leading to rot.

How strong is concrete after 3 days?

Why do we test concrete compressive strength after 28 days?

Age Strength per cent
1 day 16%
3 days 40%
7 days 65%
14 days 90%

How long does 4 inches of concrete take to cure?

When waiting for concrete to dry, keep these timeframes in mind: 24 to 48 hours – after inital set, forms can be removed and people can walk on the surface. 7 days – after partial curing, traffic from vehicles and equipment is okay. 28 days – at this point, the concrete should be fully cured.

Can I drive on concrete after 3 days?

Concrete professionals suggest waiting at least seven days after the crew is finished before parking or driving your personal vehicle(s) on your new concrete. The reason for this is because one week is the time period it takes for your new concrete to achieve 90% of its full potential strength.

How many bags of concrete do I need for a 4×4 fence post?

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.

How do you keep fence posts from rotting in concrete?

Consider Adding Posts to Concrete



From here, you should fill the hole with about 6 inches of gravel. This will prevent rotting by ensuring that the post is kept dry when water makes its way into the soil. Place the post in the gravel, then fill with a batch of cement until it reaches the top of the hole.

You might be interested:  How To Concrete A Driveway?

How many bags of Postcrete do you need per post?

You’ll need to bury the posts at least 2ft In the ground. As for how many bags of postcrete you need per post, that’s purely dependant on how big you make the post holes. As a rule of thumb, when using standard post hole diggers, I average 1 bag per post. For larger holes I would allow 1.5 bags to 2 bags per hole.

Leave a Reply

Your email address will not be published. Required fields are marked *