Often asked: How To Do Concrete Floors Yourself?

Can I put concrete floors in my house?

It’s not just for sidewalks; concrete is a stylish choice for indoor floors. Its surface can be finished in various ways—with colors, stains, and aggregates—and given a textured surface or buffed until glassy. Concrete floors are extremely durable and easy to clean, and they resist water when properly sealed.

How much does it cost to stain concrete floors yourself?

How much does it cost to stain concrete floors yourself? DIY concrete staining costs between $0.30 per square foot and $0.40 per square foot.

How thick does a concrete floor need to be?

Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks.

Can you pour concrete directly on dirt?

Long story short, yes you can pour concrete over dirt.

You might be interested:  Question: Best Deicer For Concrete?

What is the best finish for concrete floors?

Top Concrete Finishing Options

  • Acid Stain. An acid stain for concrete floor has a very bold look, recognizable by its mottled appearance and highly variegated finish.
  • Water-Based Stain.
  • Fast Stain.
  • Acrylic Sealer.
  • Standard Epoxy.
  • Metallic Epoxy.
  • Terrazzo or Granite Epoxy.
  • Quartz Sand Epoxy.

Do concrete floors get cold?

Are concrete floors cold and damp? Concrete can be cold, but no more so than ceramic tile or natural stone flooring.

Do concrete floors save money?

A sealed and properly maintained concrete floor can last indefinitely. Even in commercial applications, concrete can survive under high-traffic conditions for many decades. Over the long run, this can save you a considerable amount of money and effort over replacing flooring every few years.

Can I pour concrete over existing concrete?

If done properly, new concrete can often be poured right over an existing slab. For this to be feasible, the contractor needs to pour at least 2 inches thick, use smaller aggregate, and incorporate reinforcement such as welded wire mesh or fiber mixed into the concrete.

Is it better to stain or paint concrete floors?

Concrete stain embeds the surface to color it translucently, while opaque concrete paint covers the top of the concrete but is subject to chipping and peeling when improperly applied. Concrete stains go on quicker, dry faster and take less work than concrete paint, but they offer no significant protection.

Do you have to acid wash concrete before staining?

Schmidt also warns against acid etching of floors before staining. A lot of people think they need to acid etch the concrete like they do before applying a paint or coating, to get the paint to adhere. But acid washing depletes the lime content, which is what the minerals in the acid stain react with.

You might be interested:  Readers ask: How To Construct Floor Framing Over Concrete Slab?

How long does stained concrete last?

With stained concrete, the concrete itself will last for many years, potentially over 100 years. However, in order for the stain to last, the floors will need to be sealed or waxed once or twice per year.

Should you put plastic under concrete?

Recently, though, research has shown that the old traditional layer of 6-mil Visqueen (polyethylene plastic) under the slab is seldom effective for two main reasons: Although it may seem water-tight, this grade of material allows a lot of water vapor to pass through.

How many bags of concrete do I need for a 10×20 slab?

A 60-pound bag yields. 017 cubic yards, and an 80-pound bag yields. 022 cubic yards. For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags.

Do you need a membrane under concrete?

These days, damp proof membranes are required in the construction of all new buildings to prevent rising damp. These strong and highly durable Polyethylene 1200 Gauge DPMs are sandwiched between the hard core and concrete slab to form an impermeable layer.

Leave a Reply

Your email address will not be published. Required fields are marked *