Often asked: How To Get A Polished Concrete Floor?

Can you polish an existing concrete floor?

Almost any structurally sound concrete floor, whether new or old, can be polished. However there are some exceptions, for example with new floors no special mix design is required to achieve good results – although the floor should be in place at least 28 days before polishing begins to ensure adequate curing.

How much does it cost to polish a concrete floor?

Polished Concrete Cost. Economical: You can expect to pay between $3 and $12 per square foot for polished concrete, depending on your location and the complexity of the project.

How do I make polished concrete floors?

How To Polish Concrete Floors

  1. Step 1 – Prepare the Area for Polishing.
  2. Step 2 – Polish the Concrete Floors Using a Coarse Grit Abrasive Disc.
  3. Step 3 – Polish the Concrete Floors Using a Fine Grit Abrasive Disc.
  4. Step 4 – Polish the Floors with an Extra-Fine Grit Abrasive Disc.
  5. Step 5 – Apply a Coat of Concrete Floor Polish.
You might be interested:  Readers ask: How To Make Exposed Aggregate Concrete Pavers?

How do I make my concrete floor shiny?

After you stain your concrete floor with the color of your choice, you should apply a concrete sealer. A glossy sealer creates a shiny surface, and an acrylic wax adds an additional protective coat.

How long does it take to polish concrete floors?

Depending on the area, the level of polish, and the obstacles, the polishing can take upwards of 2 to 3 days. However, you can use the surface immediately after the polishing is done. For more information on polished concrete, or to get an estimate, you can contact us at The Floor Company.

Can I polish my concrete basement floor?

Sources I’ve seen state that nearly any concrete floor can be polished, so long as it is structurally sound. Floors that are very porous, need extensive patching, or are wavy are probably not good candidates. New slabs need to cure for 28 days before polishing.

What is the best finish for concrete floors?

Top Concrete Finishing Options

  • Acid Stain. An acid stain for concrete floor has a very bold look, recognizable by its mottled appearance and highly variegated finish.
  • Water-Based Stain.
  • Fast Stain.
  • Acrylic Sealer.
  • Standard Epoxy.
  • Metallic Epoxy.
  • Terrazzo or Granite Epoxy.
  • Quartz Sand Epoxy.

Is it expensive to polish concrete?

While there is no one set price you can usually expect prices to range between $65 – $140 per square meter depending on the desired finish (e.g. grind & seal or mechanical polish) Compared to other floor finishes on the market, Polished Concrete is a cost-effective option, however you’ll find prices vary depending on a

You might be interested:  Often asked: How To Write Concrete Poems?

Is polished concrete cheaper than hardwood?

It is possible for a “fancy” concrete floor to be more expensive than an economical hardwood floor. In general, a tight budget will find concrete floors more budget-friendly, but it depends on the design and finish of the concrete floor.

Is polished concrete cheaper than tiles?

This is because of the complicated steps involved to create the smooth and consistent finish you are after. Compare that to polished concrete look floor tiles, which cost a fraction of the price at TFO. Even including the cost of installation, it would be much cheaper to use concrete look tiles.

Is polished concrete slippery?

Is polished concrete slippery? Generally speaking, it is no more slippery than other hard flooring surfaces. Add water to it though and like any other hard surface it will be slippery. As a general rule Mechanically Polished Concrete is slip resistant – but like many other flooring options it will be slippery when wet.

Are concrete floors easy to maintain?

View in gallery Easy to maintain. Concrete flooring requires minimum maintenance. You just seal or wax it every 3-9 months and you use a neutral cleaning agent periodically. It’s easier than with wood floors, that’s for sure.

What is the best way to clean concrete floors?

You’ll just use a mop and a bucket of water mixed with a mild cleaner. Don’t use ammonia, bleach or any highly acidic substance on polished or stamped floors. Some good cleaners include Castile soap, liquid dish detergent, stone cleaners and mild floor cleaners.

Can you use vinegar to clean concrete floors?

A natural, all-purpose cleaner, white vinegar is one of the best ways to clean concrete, especially if your floor has stubborn stains caused by mildew or grease. Vinegar also works as a phenomenal spot treatment and stain remover.

You might be interested:  Quick Answer: How To Build A Deck Over Concrete Slab?

Can I use Mop and Glo on concrete floors?

Waxing Products and Concrete Flooring



Not all types of concrete flooring will benefit from this treatment, but high gloss polished flooring and some types of stained concrete flooring will. Do not use cheap wax-cleanser combination products, such as Mop-n-Glo and other products available at your local grocery store.

Leave a Reply

Your email address will not be published. Required fields are marked *