Question: Concrete Floor Waxing?

What is the best wax for concrete floors?

Cherry Wax provides excellent scuff and abrasion resistance for all types of interior flooring applications including stained concrete floors and epoxy floors. It’s superior resistance to traffic, yields a smooth polished look for months without maintenance.

How often should you wax concrete floors?

If your acid stain concrete floors were previously waxed, then you most likely need to apply a coat of Residential Floor Wax. Most residential floors should be re-waxed four times a year.

How can I make my concrete floor shine?

Regular sweeping and weekly cleaning with a mop and mild solution of dish soap and water should help concrete keep its shine. Every few months, use a pressure washer to clean dirt and debris from crevices.

What does vinegar do to concrete?

Vinegar does not dissolve concrete itself but can degrade the cement that binds concrete together. As a weak, dilute acid, vinegar will cause only minor damage to concrete but can take the shine off polished surfaces. It can, however, be used to remove small amounts of cement from tools.

You might be interested:  Readers ask: How To Strip Concrete Floors?

Should I wax concrete floor?

Concrete Floor Wax. Many concrete contractors recommend applying a mop-down wax or floor finish to your decorative concrete floor after you seal it. This sacrificial wax coating not only makes the floor look nice, it also protects the surface from scuffs, scratches and grit.

Can you use Pine Sol on concrete floors?

You can use PineSol® Cleaners on most concrete floors. PineSol® Cleaners are concentrated formulas that you dilute for most jobs. For general concrete cleanup, use a 24 oz. bottle of PineSol® for 12 gallons of cleaning power.

Can I use Mop and Glo on concrete floors?

Waxing Products and Concrete Flooring



Not all types of concrete flooring will benefit from this treatment, but high gloss polished flooring and some types of stained concrete flooring will. Do not use cheap wax-cleanser combination products, such as Mop-n-Glo and other products available at your local grocery store.

Can you buff a sealed concrete floor?

If an impregnator has been applied to the floor, or if a sealant and a finish were applied, you will need to buff or burnish it. You also may need to strip and refinish the floor, based on its appearance and the amount of time, energy, and funding the customer wants to put into it.

Can you use quick shine on concrete floors?

Yes, Quick Shine will provide a high gloss shine on any hard surface floor.

Can you wax painted concrete floors?

Epoxy paint has a gloss finish that precludes the necessity of waxing on a regular basis. However, if your epoxy-painted floors have lost their luster, it is possible to apply a couple of coats of wax to protect and shine your floors.

You might be interested:  Often asked: How To Repair A Concrete Patio?

Can you seal concrete with wax?

The surface is too smooth for many film-building (topical) sealers to stick to. When concrete is polished to a gloss, only penetrating sealers, hardeners and wax can be used. Penetrating sealers are liquids that are applied to bare concrete, soak in, and then once wiped off and dried, are usually nearly invisible.

Can you polish existing concrete floors?

Almost any structurally sound concrete floor, whether new or old, can be polished. However there are some exceptions, for example with new floors no special mix design is required to achieve good results – although the floor should be in place at least 28 days before polishing begins to ensure adequate curing.

Can I polish my concrete floor myself?

The good news is, you can achieve this smooth, glossy look for yourself AND you don’t have to outsource the job to tradesmen either! With a range of easy-to-operate concrete polishing equipment for rent, you can be the master of your own project on either old or new concrete floors.

What is the best chemical to clean concrete?

Five Concrete Cleaning Products To Use

  1. Soda. Soda can be used to remove grease stains.
  2. Detergent. This is recommended for smaller grease spills.
  3. Vinegar and Baking Soda. Cleaning concrete with vinegar or baking soda is a good option if you are looking for a natural cleaner.
  4. Concrete Cleaner or Degreaser.
  5. Bleach.

Leave a Reply

Your email address will not be published. Required fields are marked *