Question: How Does Stamped Concrete Work?

How does stamped concrete hold up?

Like conventional concrete, stamped surfaces will last for decades when properly installed and maintained, even when exposed to harsh winter weather conditions. In some cases, stamped concrete can be even more durable than standard concrete, especially if a color hardener was used when it was poured.

How long after pouring concrete can you stamp it?

“But, in general, when you can touch the concrete and not have any sand on your hand, it’s about time, when that laitance is crusted enough, to put a release agent on there. Generally, it’s within an hour or two.” Frazier recommends getting enough stamps to cover at least the width of the slab.

How often do you need to seal stamped concrete?

Sealers also make the concrete easier to clean and prevent color fading from UV exposure. Stamped concrete should be resealed every 2 to 3 years, depending on your weather conditions.

Can I do stamped concrete yourself?

Stamped Concrete DIY. The short answer is NO! Concrete, especially stamped concrete, is unforgiving and expensive in terms of materials and time. Unlike carpentry, plumbing, or electrical work, concrete doesn’t come apart and you can‘t come back tomorrow to finish if you run out of time or patience.

You might be interested:  Readers ask: Inground Pool Repair Concrete?

How much does a 20×20 stamped concrete patio cost?

The average cost for a stamped concrete is $5 to $12 per square foot, not including the concrete slab which costs $2 – $7 per square foot. Most homeowners spend a total of between $3,751 – $8,540 for stamped concrete patio. Get free estimates from concrete pros near you.

Does stamped concrete crack easily?

Stamped concrete isn’t going to last forever. It will, eventually, start to crack and break down just like any other kind of concrete. However, stamped concrete is actually very resistant to cracking and, when you take steps to take care of it, it should hold up for a long time before it needs to be replaced.

At what point do you stamp concrete?

If you leave a clean imprint about 3/16 to 1/4 inch deep, you can generally begin stamping. Another test is to place a stamp on the concrete and step on it. The stamp should hold your weight and not slide around or sink too deeply into the surface.

Does stamping concrete weaken it?

Stamped concrete is just regular concrete with dye added & stamped with a pattern. Additional water weakens the concrete bond, AND too fast drying also. The concrete needs to retain its moisture for about 30 days to properly form the crystaline structure that gives it strength.

Is stamped concrete slippery?

Depending on the design choices of each client, stamped concrete can be polished to a glossy finish looking almost like marble instead of concrete; such shinier versions of stamped concrete can indeed become slippery when wet — or, when not carefully crafted.

You might be interested:  FAQ: Installing Cabinets On Concrete Floor?

Is it OK to power wash stamped concrete?

Never use a pressure washer to clean your stamped concrete. Over time the high pressure breaks down the sealer and reduces the protection, the shine and expected life of the sealer. Always use a gentle cleaner when washing stamped concrete.

How much does it cost to reseal stamped concrete?

How much does it cost to seal stamped concrete? Sealing stamped concrete costs $0.13 to $0.20 per square foot.

Is stamped concrete hard to maintain?

Stamped concrete is easy to maintain. In general, sweeping and wet mopping with water are sufficient for regular maintenance of a stamped concrete surface. You can also mop or pressure wash the surface with a mild detergent. Make sure you avoid using harsh chemical cleaners on stamped concrete surfaces.

Does stamped concrete add value?

By stamping concrete with the look of expensive stone, such as brick, cobblestones, or slate, you are able to add significant visual improvement with increased cost savings. Pavers. Although slightly more expensive than stamped concrete, brick paver patios allow for a timeless look and increased resale value.

Why is stamped concrete so expensive?

You begin by having the client or designer pick out three things; the stamp design, the color of the concrete, and the color of the release which gives the highlights. It can also be cost prohibitive for the contractor to purchase a set of stamps as they can run upwards of $4,000 for a complete set.

Leave a Reply

Your email address will not be published. Required fields are marked *