Question: How To Make Polished Concrete Floors?

Can any concrete floor be polished?

Almost any structurally sound concrete floor, whether new or old, can be polished. However there are some exceptions, for example with new floors no special mix design is required to achieve good results – although the floor should be in place at least 28 days before polishing begins to ensure adequate curing.

Can you do polished concrete yourself?

To polish concrete the do-it-yourself way, you‘re going to need a concrete grinder. Before burnishing one last time, put a thin coat of concrete sealer over the floor. The result will be a stone-like surface that gleams without the aid of floor waxes or oils.

How much does it cost to polish concrete floors?

Polished Concrete Cost. Economical: You can expect to pay between $3 and $12 per square foot for polished concrete, depending on your location and the complexity of the project.

Is polished concrete cheaper than tiles?

This is because of the complicated steps involved to create the smooth and consistent finish you are after. Compare that to polished concrete look floor tiles, which cost a fraction of the price at TFO. Even including the cost of installation, it would be much cheaper to use concrete look tiles.

You might be interested:  Readers ask: What Is The Difference Between Asphalt And Concrete?

Is polished concrete slippery?

Is polished concrete slippery? Generally speaking, it is no more slippery than other hard flooring surfaces. Add water to it though and like any other hard surface it will be slippery. As a general rule Mechanically Polished Concrete is slip resistant – but like many other flooring options it will be slippery when wet.

How long does it take to polish concrete floors?

Depending on the area, the level of polish, and the obstacles, the polishing can take upwards of 2 to 3 days. However, you can use the surface immediately after the polishing is done. For more information on polished concrete, or to get an estimate, you can contact us at The Floor Company.

How do I make concrete floor glossy?

After you stain your concrete floor with the color of your choice, you should apply a concrete sealer. A glossy sealer creates a shiny surface, and an acrylic wax adds an additional protective coat.

Can I polish my concrete basement floor?

Sources I’ve seen state that nearly any concrete floor can be polished, so long as it is structurally sound. Floors that are very porous, need extensive patching, or are wavy are probably not good candidates. New slabs need to cure for 28 days before polishing.

Is polished concrete cheaper than floorboards?

Timber floorboards, on the other hand, will nearly always be more expensive than polished concrete to install and will cost more to maintain in the long run. Similarly, floor tiles will cost more in time and effort to keep clean.

You might be interested:  Quick Answer: Round Concrete Steps?

Is polished concrete expensive?

While there is no one set price you can usually expect prices to range between $65 – $140 per square meter depending on the desired finish (e.g. grind & seal or mechanical polish) Compared to other floor finishes on the market, Polished Concrete is a cost-effective option, however you’ll find prices vary depending on a

Can you have polished concrete in bathrooms?

Polished concrete can look nice in bathrooms – there’s no grout so it gives a very clean look. It’s easy to slip on a highly polished floor when wet though, so you need a finish with extra sanding to give it some texture,’ says the renovation specialist.

What is the best finish for concrete floors?

Top Concrete Finishing Options

  • Acid Stain. An acid stain for concrete floor has a very bold look, recognizable by its mottled appearance and highly variegated finish.
  • Water-Based Stain.
  • Fast Stain.
  • Acrylic Sealer.
  • Standard Epoxy.
  • Metallic Epoxy.
  • Terrazzo or Granite Epoxy.
  • Quartz Sand Epoxy.

Can you use a steam mop on polished concrete floors?

No. A steam mop should never be used on a Polished Concrete floor. Nor should one use harsh chemicals such as bleach, citrus products or oils. A microfibre mop is all that is required in conjunction with water or a low ph cleaner.

Are concrete floors easy to maintain?

View in gallery Easy to maintain. Concrete flooring requires minimum maintenance. You just seal or wax it every 3-9 months and you use a neutral cleaning agent periodically. It’s easier than with wood floors, that’s for sure.

Leave a Reply

Your email address will not be published. Required fields are marked *