Question: Stain Concrete Statues?

What is the best paint for concrete statues?

Use acrylic latex paint on concrete statues.



For concrete statuary, water-based acrylic latex paints are recommended for their ability to soak into the concrete and stain it beyond its surface. Acrylic latex paints also don’t dry and crack like a shell over time, like oil-based paint does.

Can you stain existing concrete?

Your existing old concrete should be fine to stain, so long as it is not contaminated with glue, paint, oil, grease, sealers, waxes, or anything else that would prevent the stain from soaking into the pores of the concrete.

Is it better to paint or stain concrete?

Concrete stain embeds the surface to color it translucently, while opaque concrete paint covers the top of the concrete but is subject to chipping and peeling when improperly applied. Concrete stains go on quicker, dry faster and take less work than concrete paint, but they offer no significant protection.

You might be interested:  Readers ask: How To Stick Posters To Concrete Walls?

How do you make concrete statues look old?

In the bowl or bucket, mix together water, bonding agent and pigment.

  1. Spray a small area of the statue with water.
  2. Dip the paintbrush into the color-solution, and apply the color to the area you’ve just wet.
  3. Using the rag, immediately wipe any protruding, or “high” areas.
  4. Step back and look at your work.

How do you fix crumbling concrete statues?

For small cracks, she recommends using a concrete crack sealant that comes in a tube. For breaks where chunks are missing, as in your statue, she suggests InstaCrete, an epoxy made by Polymeric Systems (www.polymericsystems.com). “It’s almost like a putty, but it dries hard like concrete,” she said.

How do you seal concrete statues?

Brush a waterproof concrete sealer over the surface of a clean and dry statue. Allow the ornament to dry for at least 24 hours or per the directions on the sealant container. Apply another coat of sealant if necessary to fully cover the concrete. Leave the bottom of the statue unsealed to allow the concrete to breathe.

How do you prepare concrete for staining?

Patching Floors Before Staining



For general-purpose cleaning and degreasing, Schmidt sweeps the floor and then scrubs it thoroughly using trisodium phosphate (TSP). For scrubbing, he recommends using a rotary floor scrubber with a green Nylo-Grit pad designed for aggressive scrubbing of concrete.

How long do you leave acid stain on concrete?

Allow the acid stain to penetrate the entire concrete surface and fully develop its color for from five to 24 hours (check manufacturer’s instructions for exact timing). The longer you leave the acid stain on, the deeper the final hue will be.

You might be interested:  Question: How To Install A Trench Drain In Concrete?

What is the best concrete stain?

6 Best Concrete Stains

  1. Kemiko Stone Tone Concrete Stain. View Deal.
  2. User & Eco-Friendly Semi-Transparent Professional Grade Cement Stain. View Deal.
  3. Acid Stain DIY Kit with 100% Acrylic Solvent Sealer.
  4. VIVID Acid Stain – 1 Gal – Walnut.
  5. TuffCrete Waterborne Acrylic Concrete Stain Paint.
  6. Rust-Oleum 247162 Concrete Stain Spray.

How long do concrete stains last?

With stained concrete, the concrete itself will last for many years, potentially over 100 years. However, in order for the stain to last, the floors will need to be sealed or waxed once or twice per year.

Do you have to seal concrete after staining?

After allowing the stained concrete to dry overnight or longer, apply your sealer of choice. Most stain manufacturers recommend applying two coats of sealer for optimum durability.

Which is better epoxy or stain concrete?

Epoxy flooring and other resinous finishes, when correctly selected and properly installed, routinely outperform stained and polished concrete in terms of chemical, acid and solvent resistance, abrasion and stain resistance, cleanability and the low level of required maintenance, slip resistance, ability to withstand

How do you make moss grow on concrete statues?

Make it: For an old mossy look, mix 1 cup water with 1 cup buttermilk and add a handful of pulverized moss, dried or fresh. Use the solution to paint an object such as a stone or sculpture.

How do you increase moss growth on concrete?

First, combine plain yogurt or buttermilk (two cups) and chopped moss (one and a half cups) in a bucket. Mix until the concoction becomes easily spreadable; add water if it’s too thick, additional moss if it’s too thin. Now spread the mixture wherever you would like the moss to grow.

You might be interested:  Readers ask: Concrete Lag Bolts?

How do you paint eyes on concrete statues?

How do you paint eyes on concrete statues?

  1. Clean your concrete statue outside with a hose.
  2. Brush on a latex base coat over the eye area of your statue with a fine paintbrush.
  3. Wash your brush with soap and water to remove the base coat paint.
  4. Dip your fine paintbrush into black exterior latex paint.
  5. Wash your brush with soapy water.
  6. Tip.

Leave a Reply

Your email address will not be published. Required fields are marked *