Quick Answer: Cost To Seal Concrete Driveway?

Is it worth sealing concrete driveway?

And concrete driveways should be sealed every four or five years to protect them from water penetration and to prolong their life. Many people believe that concrete driveways don’t need maintenance, so they may never apply a sealer.

How much does it cost to seal concrete?

Cost of Acrylic Concrete Sealer

Acrylic Concrete Sealer Costs Zip Code
Basic Best
Acrylic Concrete Sealer – Installation Cost $35.00 – $40.00 $50.00 – $60.00
Acrylic Concrete Sealer – Total $55.00 – $61.00 $75.00 – $90.00
Acrylic Concrete Sealer – Total Average Cost per square foot $0.58 $0.82

How much does a 5 gallon bucket of driveway sealer cover?

Divide the square footage of the driveway by 80 to find the number of gallons of sealer you need for one coat. Each gallon covers about 80 square feet and each bucket of sealer contains 5 gallons.

You might be interested:  How To Fix Flaking Concrete?

Can you seal coat a concrete driveway?

Sealing a driveway not only extends it service life, it will also improve the appearance of decorative concrete by enhancing the color and gloss. Applying sealer to a driveway is not difficult, and in most cases a standard residential driveway can be sealed in less than a day.

Should I seal my concrete driveway after pressure washing?

One way to keep your concrete driveway, walkway or walls looking good is to wash them and seal them every 2 to 3 years. Sealer also helps prevent stains from setting in on the concrete. Sealing concrete after pressure washing is similar to painting walls in your house.

How do you seal an old concrete driveway?

Instructions

  1. Step 1: Apply Concrete Sealer With a Garden Sprayer or Roller. Garden/Tank Sprayer: Add the sealer to the sprayer’s tank. Thoroughly cover the concrete with overlapping strokes.
  2. Step 2: Apply a Second Coat of Sealer. Check the sealer instructions before starting your second coat.

How long should you wait before sealing concrete?

If your concrete is new, you‘ll need to let it cure; wait at least one month before applying sealer.

How much does a gallon of concrete sealer cover?

Penetrating concrete sealers will typically cover anywhere from 100 – 400 square feet per gallon. Two coats are usually recommended so this will cut the coverage amount in half to 50 – 200 square feet per gallon for 2 coats.

Are you supposed to seal concrete?

Concrete performs quite adequately if it is never sealed at all, but applying a good quality sealer every few years will extend its life and keep it looking good. Applying a concrete sealer is an easy project for a DIYer, and it will keep your concrete slabs looking good and potentially lasting longer.

You might be interested:  How To Make Polymer Concrete?

Is it cheaper to seal your own driveway?

Sealing the driveway yourself will be cheaper than hiring a professional, but you’re still going to have to fork over some cash to do the job right. According to CostHelper, DIY supplies cost about about $50 to $200, depending on the driveway’s condition and size.

How long does driveway sealer need to dry before rain?

Normally we like to allow at least 24 hours before any rain but we use additives that can allow us to speed up the curing process. Explanation: If it’s just done say under three hours and it’s a hard rsin, yes.

Can you use a roller to seal a driveway?

There are different ways to apply sealer to a driveway; one of which is with a paint roller. Applying sealer with a paint roller ensures a smooth, even coating on the surface. The work also goes faster when you use a paint roller instead of a paint brush.

How do I prep my driveway for sealing?

Prep the driveway for sealing

Start with a push broom and sweep away the heaviest debris. Then use a garden hose, or better yet, a pressure washer to rinse the surface clean of all loose dirt, sand, and grit. Start at the highest end of the driveway and work down and out toward the edges.

Does blacktop sealer stick to concrete?

Asphalt sealer only sticks to concrete when you don’t want it to. Other than that it will peel up.

How long after sealing concrete driveway can you drive on it?

Your new concrete is designed to reach 90% of its full strength potential after 7 days, so feel free to drive your personal vehicle on it then. It will take additional time before you can drive or park heavy equipment or machinery on your newly poured concrete, so make sure to wait at least 30 days.

Leave a Reply

Your email address will not be published. Required fields are marked *