Quick Answer: How To Fix A Bad Concrete Finish?

Is there anyway to fix a bad concrete job?

In most cases, a poor concrete job cannot be saved; the slab should be removed and a new one poured in its place. If the visible finishing was done poorly then you can assume there are other hidden problems that will soon appear.

Can you repair damaged concrete?

With proper attention to surface preparation and material selection, durable repairs can be made to worn, scaling or cracked surfaces, extending the life of the concrete.

How do you make concrete look new again?

3 Ways to Make Old Concrete Look New Again

  1. Power Wash. Over time, your concrete will accumulate grime and dirt.
  2. Resurface. If you’re looking for a quick and easy way to improve your curb appeal, resurfacing your concrete steps and driveway is a great way to start.
  3. Add Stain or Sealing Coats.
  4. Revive Your Old Concrete.

Can you pour new concrete over old cracked concrete?

There are situations when pouring new concrete isn’t the most suitable option. For instance, surfaces with larger cracks, heaving or settling conditions, or where height cannot be raised, replacement is a better solution. However, in most cases, you can pour a new layer of concrete onto the existing one.

You might be interested:  Often asked: How To Remove Grease And Oil Stains From Concrete?

Does rain affect new concrete?

Rainwater can cause a new concrete surface to become soft, which in turn decreases the abrasion resistance and strength of the concrete, while increasing the tendency for dusting and cracking to develop. The key to preventing damage to the concrete surface by a rainstorm is proper preparation and timing.

How do you fix broomed concrete?

A. There are two things you can do fix the rough finish. One is, you could grind or polish the surface which would remove the rough broom finish and smooth the surface of the concrete. Some of the aggregate would be exposed giving you a nice smooth decorative look to your sidewalk and patio.

What is the best concrete repair product?

Quikrete 10 lb. Vinyl Concrete Patcher is ideal for making smooth repairs to crack or chipped concrete floors, sidewalks or steps. It has strong adhesive properties allowing it to be applied down to a featheredge.

What is the best concrete crack filler?

The Top 7 Best Concrete Crack Fillers for 2021 are:

  • Bluestar Flexible Concrete Crack Filler.
  • EZR Hairline Crack Sealer.
  • Red Devil Pre-Mixed Concrete Patch.
  • PC-Concrete Two-Part Epoxy Adhesive Paste.
  • DRYLOK Fast Plug Hydraulic Cement.
  • Dalton Enterprises 35099 PLI-STIX.
  • Damtite Concrete SuperPatch.

Does bleach destroy concrete?

Bleach is safe to use on concrete. When applied to concrete, bleach does not harm the sturdy material. However, it does remove spots and unwanted matter from the surface, such as mildew and moss. It also disinfects concrete.

What is the best chemical to clean concrete?

Five Concrete Cleaning Products To Use

  1. Soda. Soda can be used to remove grease stains.
  2. Detergent. This is recommended for smaller grease spills.
  3. Vinegar and Baking Soda. Cleaning concrete with vinegar or baking soda is a good option if you are looking for a natural cleaner.
  4. Concrete Cleaner or Degreaser.
  5. Bleach.
You might be interested:  FAQ: How Much Does One Cubic Foot Of Concrete Weigh?

Does concrete take 100 years to cure?

Does concrete take 100 years to cure? No. Not on at least two basis points. Firstly, concrete only continues hardening for so long as the pore moisture value drops below a certain ill-defined value.

Can new concrete go over old?

If done properly, new concrete can often be poured right over an existing slab. For this to be feasible, the contractor needs to pour at least 2 inches thick, use smaller aggregate, and incorporate reinforcement such as welded wire mesh or fiber mixed into the concrete.

Can you put a thin layer of concrete over concrete?

Yes, you may pour a concrete pad overlay over an existing slab. You need to consider the added height and weight of the overlay on the existing structure. Overlays may include polymers, portland cement concrete, or epoxies.

What is the best concrete overlay?

Broom Finish Concrete Overlay



SureBroom is our strongest overlay, has the largest aggregate, and is suited for the highest wear surface including vehicular and foot traffic. Trowel or spray applications.

Leave a Reply

Your email address will not be published. Required fields are marked *