Quick Answer: How To Make A Stamped Concrete Patio?

Can I do stamped concrete yourself?

Stamped Concrete DIY. The short answer is NO! Concrete, especially stamped concrete, is unforgiving and expensive in terms of materials and time. Unlike carpentry, plumbing, or electrical work, concrete doesn’t come apart and you can‘t come back tomorrow to finish if you run out of time or patience.

How much does a 20×20 stamped concrete patio cost?

The average cost for a stamped concrete is $5 to $12 per square foot, not including the concrete slab which costs $2 – $7 per square foot. Most homeowners spend a total of between $3,751 – $8,540 for stamped concrete patio. Get free estimates from concrete pros near you.

How much does it cost to put in a stamped concrete patio?

Stamped Concrete Cost. Basic stamped concrete costs between $8 and $12 per square foot, but more involved projects can be as expensive as $18 per square foot. How much you’ll pay for stamped concrete varies widely, depending on the prices for materials and labor in your local market and the complexity of the job.

You might be interested:  FAQ: How To Hang Things On Concrete Dorm Walls?

How do you make homemade stamped concrete?

Table of Contents

  1. Step 1: Clean the Surface.
  2. Step 2: Etch the Concrete Porch Floor.
  3. Step 3: Prep the Porch for the Skim Coat.
  4. Step 4: Mix the Skim Coat.
  5. Step 5: Apply the Skim Coat.
  6. Step 6: Mix the Thin Finish and Texture Pave.
  7. Step 7: Apply the Thin Finish and Texture Pave.
  8. Step 8: Stamp the Concrete.

How long does stamped concrete last?

Provided it’s installed correctly and adequately maintained, stamped concrete will last just as long as non-stamped, or standard, concrete—about 25 years. That’s because the processes of installing stamped concrete and standard concrete are mostly the same.

Why is stamped concrete so expensive?

You begin by having the client or designer pick out three things; the stamp design, the color of the concrete, and the color of the release which gives the highlights. It can also be cost prohibitive for the contractor to purchase a set of stamps as they can run upwards of $4,000 for a complete set.

How much does a 12×12 stamped concrete patio cost?

Stamped Concrete Patio Cost



Patios cost anywhere from $8 to $28 per square foot when made using stamped concrete. A 12-foot by 12-foot patio costs $1,160 to $4,040, while larger 16-foot by 20-foot patios are $2,560 to $8,960.

Does a stamped concrete patio increase home value?

Installing a patio is another project that expands and enhances your outside living area while increasing the value of your home. According to the NAR and NALP, an 18′ x 20′ concrete paver patio costs about $7,200 and you’ll earn around 69 percent.

You might be interested:  Readers ask: How Long To Let Concrete Cure Before Removing Forms?

What happens if you don’t seal stamped concrete?

An unsealed, decorative stained concrete surface will show faded colors in a matter of a few months. You could advise your customer that’s what happens with an unsealed project and let them make the decision about sealing, but rest assured that an “I told you so,” from you when the fading happens will not comfort them.

How much does a 10×20 concrete patio cost?

Cost of concrete per square foot

Slab Size Square Feet Average Cost
10×20 200 $1,200
12×12 144 $864
15×15 225 $1,350
16×20 320 $1,920

Is it cheaper to lay concrete or pavers?

As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.

Which is cheaper pavers or stamped concrete?

In general, most sources suggest that the upfront cost of stamped pavement tends to be a more inexpensive option in relation to pavers. Long-term cost efficiency between the two however is relative to factors including proper installation, climate and periodic maintenance.

Is stamped concrete slippery?

Depending on the design choices of each client, stamped concrete can be polished to a glossy finish looking almost like marble instead of concrete; such shinier versions of stamped concrete can indeed become slippery when wet — or, when not carefully crafted.

How do you color stamped concrete?

Dry-Shake Color HardenersProbably the most popular method for coloring stamped concrete is the use of dry-shake color hardeners. Unlike integral pigments, which color the entire concrete matrix, dry shakes are hand broadcast onto the surface of the freshly placed concrete and color only the top layer.

You might be interested:  How Long For Concrete To Dry Before Rain?

Can you stamp concrete without color?

Base color attained with color hardener or integral color is important, but the secondary color can be almost as important. The secondary or antiquing color is what gives stamped concrete the look of stone, tile or wood. Without secondary color, stamped concrete looks artificial and unattractive.

Leave a Reply

Your email address will not be published. Required fields are marked *