Quick Answer: Stamped Concrete Cost?

How much does a 20×20 stamped concrete patio cost?

The average cost for a stamped concrete is $5 to $12 per square foot, not including the concrete slab which costs $2 – $7 per square foot. Most homeowners spend a total of between $3,751 – $8,540 for stamped concrete patio. Get free estimates from concrete pros near you.

How much does it cost to pour a 20×30 slab?

Concrete Slab Cost Calculator

Size (in feet) Approximate Cost
20×20 $2,400
24×24 $3,460
20×30 $3,600
25×25 $3,750

How much does a 12×12 stamped concrete patio cost?

Stamped Concrete Patio Cost

Patios cost anywhere from $8 to $28 per square foot when made using stamped concrete. A 12-foot by 12-foot patio costs $1,160 to $4,040, while larger 16-foot by 20-foot patios are $2,560 to $8,960.

Why is stamped concrete so expensive?

You begin by having the client or designer pick out three things; the stamp design, the color of the concrete, and the color of the release which gives the highlights. It can also be cost prohibitive for the contractor to purchase a set of stamps as they can run upwards of $4,000 for a complete set.

You might be interested:  FAQ: How Many Pounds In A Cubic Yard Of Concrete?

How long will stamped concrete last?

Provided it’s installed correctly and adequately maintained, stamped concrete will last just as long as non-stamped, or standard, concrete—about 25 years. That’s because the processes of installing stamped concrete and standard concrete are mostly the same.

Can I do stamped concrete yourself?

Stamped Concrete DIY. The short answer is NO! Concrete, especially stamped concrete, is unforgiving and expensive in terms of materials and time. Unlike carpentry, plumbing, or electrical work, concrete doesn’t come apart and you can‘t come back tomorrow to finish if you run out of time or patience.

Is it cheaper to pour concrete yourself?

One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. Otherwise, you risk getting a weaker concrete once it cures, which could lead to cracks or crumbles within a couple of years.

How many bags of concrete do I need for a 10×20 slab?

A 60-pound bag yields. 017 cubic yards, and an 80-pound bag yields. 022 cubic yards. For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags.

What is the difference between a concrete slab and a cement slab?

What is the difference between cement and concrete? Although the terms cement and concrete often are used interchangeably, cement is actually an ingredient of concrete. Concrete is a mixture of aggregates and paste. The aggregates are sand and gravel or crushed stone; the paste is water and portland cement.

You might be interested:  Question: How Many Bags Of Concrete Mix Do I Need?

Does stamped concrete add value?

By stamping concrete with the look of expensive stone, such as brick, cobblestones, or slate, you are able to add significant visual improvement with increased cost savings. Pavers. Although slightly more expensive than stamped concrete, brick paver patios allow for a timeless look and increased resale value.

What happens if you don’t seal stamped concrete?

An unsealed, decorative stained concrete surface will show faded colors in a matter of a few months. You could advise your customer that’s what happens with an unsealed project and let them make the decision about sealing, but rest assured that an “I told you so,” from you when the fading happens will not comfort them.

How much does a 10×20 concrete patio cost?

Cost of concrete per square foot

Slab Size Square Feet Average Cost
10×20 200 $1,200
12×12 144 $864
15×15 225 $1,350
16×20 320 $1,920

Can you power wash stamped concrete?

Never use a pressure washer to clean your stamped concrete. Over time the high pressure breaks down the sealer and reduces the protection, the shine and expected life of the sealer. Always use a gentle cleaner when washing stamped concrete.

Can you pour stamped concrete over existing concrete?

CAN YOU DO STAMPED CONCRETE OVER OLD CONCRETE? Stamped concrete overlays can be used on new or existing concrete and on interior or exterior surfaces. They can even be applied to walls and other vertical surfaces.

Is stamped concrete slippery?

Depending on the design choices of each client, stamped concrete can be polished to a glossy finish looking almost like marble instead of concrete; such shinier versions of stamped concrete can indeed become slippery when wet — or, when not carefully crafted.

Leave a Reply

Your email address will not be published. Required fields are marked *