Readers ask: How To Install A Trench Drain In Existing Concrete?

How do you install a drain in an existing concrete floor?

Installing a floor drain into an existing concrete slab will require some sawing of the concrete. You can hire someone to saw a trench in the concrete floor from where the drain will be to where the drain pipe will exit the building. They usually remove the sawed concrete and get it out of the building for you.

How much does it cost to install a trench drain?

The average cost to install a trench drain is $30 to $150 per linear foot, depending on the grate and channel material (plastic, metal, or concrete). Trench drains are set into driveways, patios, concrete slabs, or between pavers with a flush grate surface that catches water in a channel.

How deep should a trench drain be?

The trench should be about 18 inches deep and 9 to 12 inches wide. French drains need to have a slope of at least 1 percent, so the force of gravity will work for you. This means that the drain should slope down a total of at least one inch for every 10 feet of pipe.

You might be interested:  Quick Answer: How Much Concrete In 80 Lb Bag?

Can I drill holes in concrete for drainage?

You will be trying to drain hundreds of square inches of surface area into a (maybe) 9 – 12 square inch hole. That small of an area opening will quickly saturate the soil and be of little or no use. To answer your question directly: Yes, it is easy to drill through concrete with the right equipment.

Can you add a drain to your garage floor?

Can you put a floor drain in an existing garage? Yes, even if the floor is just a concrete slab. The drain can be attached to an existing sewer line or just flow to a runoff outside. If water is pooling in your garage, a floor drain can help you remove the mess before it spreads into your house.

What is the difference between a French drain and a trench drain?

The terms rhyme, they both involve trenches, and French drains aren’t really French. The defining difference is very simple, however: Trench drains are surface structures while French drains are subsurface ones. Let’s look at how they both work to keep water flowing offsite.

Is a French drain worth it?

If you’re dealing with a wet basement or a soggy lawn, you might want to look into installing a French drain. While it’s not necessarily a “quick fix,” a French drain can be a smart investment to keep your home and yard dry.

How do I divert water from my patio?

shovels

  1. Dig a Swale. A swale is a shallow trench that redirects water to where it can be safely released.
  2. Construct a Dry Stream. Like swales, dry streams redirect water and prevent runoff damage.
  3. Grow A Rain Garden.
  4. Build a Berm.
  5. Route Water Into a Dry Well.
  6. Lay Pervious Paving.
You might be interested:  FAQ: How Often Should I Water New Concrete?

How do I divert my standing water from my house?

How To Divert Water From The Home

  1. Clean Your Gutters. This task is both simple and free.
  2. Extend Your Downspouts.
  3. Create A Rain Garden.
  4. Install A Rain Barrel.
  5. Seal The Driveway.
  6. Install A French Drain.
  7. Improve The Grading.
  8. Install A Sump Pump.

Is standing water bad for concrete?

Standing water can cause a wide variety of problems, none more damaging or costly than the problems it can cause with a home’s foundation. Concrete foundations are porous, and water fills in any pores it can find. Over time, the water can seep into the concrete foundation and ultimately break down the concrete.

How do you dig a trench for drainage?

Terminate the drain at a safe place, where any water flowing out the end will not cause erosion. Dig a trench that is 18 inches deep and 9–12 inches wide.



Cover Trench

  1. Fill the trench with additional gravel.
  2. Line the trench with bricks or stones.
  3. Cover the trench with soil—you can even plant grass on top!

What is the easiest way to dig a trench?

  1. Loosen hard soil using a pick axe.
  2. Define the sides of the trench using the point of your shovel.
  3. Pull soil out of the bottom of the trench with a grub hoe once it becomes too deep to use a shovel.
  4. Place all the soil that you pull out of the trench on one side.

Does a French drain need to be below frost line?

Unless specifically regulated by local building authorities, french drains may be placed either above or below the frost line. However, the placement of a french drain relative to the frost line greatly affects the drain’s performance.

Leave a Reply

Your email address will not be published. Required fields are marked *