Readers ask: Where Can I Buy Concrete Stain?

What is the best concrete stain?

6 Best Concrete Stains

  1. Kemiko Stone Tone Concrete Stain. View Deal.
  2. User & Eco-Friendly Semi-Transparent Professional Grade Cement Stain. View Deal.
  3. Acid Stain DIY Kit with 100% Acrylic Solvent Sealer.
  4. VIVID Acid Stain – 1 Gal – Walnut.
  5. TuffCrete Waterborne Acrylic Concrete Stain Paint.
  6. Rust-Oleum 247162 Concrete Stain Spray.

How much does concrete stain cost?

The cost of stained concrete can vary greatly. For a basic application of a single stain color with sealer and minimal surface prep, most decorative concrete contractors charge between $2 and $4 per square foot. As the complexity of the job rises, so will the price.

Does Sherwin Williams sell concrete stain?

SherwinWilliams world of color doesn’t stop with our paints — our wide variety of stains can enhance and protect any porch, deck, trim or siding as well as concrete driveways and walkways. Our concrete stains provide a simple way to not only add color and style, but also help protect the surface.

You might be interested:  Question: How To Lift A Sinking Concrete Slab?

What is the difference between concrete stain and concrete dye?

Unlike concrete stains, which react chemically with the calcium hydroxide in concrete, dyes are nonreactive and impart color by penetrating concrete or other porous cementitious surfaces. The small dye particles fill the pores of the concrete and are very hard to remove, making dyes nearly as permanent as stains.

Is it better to stain or paint concrete?

Concrete stain embeds the surface to color it translucently, while opaque concrete paint covers the top of the concrete but is subject to chipping and peeling when improperly applied. Concrete stains go on quicker, dry faster and take less work than concrete paint, but they offer no significant protection.

How long after staining concrete can you seal it?

Be sure and remove any residue left behind if using our acid stain, then apply sealer. Don’t seal too soon as there could be moisture in the floor and hazing can occur. A good rule of thumb is to wait 24 hours time after any water has been applied to the floor before sealing.

Do you have to acid wash concrete before staining?

Schmidt also warns against acid etching of floors before staining. A lot of people think they need to acid etch the concrete like they do before applying a paint or coating, to get the paint to adhere. But acid washing depletes the lime content, which is what the minerals in the acid stain react with.

Is staining concrete cheaper than tile?

Staining a concrete floor typically costs less than tiling. Installing ceramic or porcelain tile costs on average between $15 and $20 per square foot.

You might be interested:  Often asked: How Romans Made Concrete?

Does concrete stain last?

Although concrete stain is permanent and won’t flake off like paint, it penetrates only the top layer of the concrete surface and will eventually wear away as the surface is worn by traffic or weather exposure.

Is concrete stain the same as brick stain?

Masonry stain works the same way wood stain does; by penetrating the surface of the brick, concrete, or stucco, and depositing pigment. Penetrating masonry stains are superior to paint in several ways. Because they soak into the surface, instead of sitting on top, they won’t bubble or peel.

What is the best water based concrete stain?

Our Best Concrete Stain Reviews

  1. EnduraCoat Acid Stain DIY Kit with 100% Acrylic Solvent Sealer.
  2. Concrete Resurrection Water Based Concrete Stain.
  3. VIVID Acid Stain – 1 Gal – Walnut.
  4. Kemiko Stone Tone Concrete Stain.
  5. BrandBold Brilliance Concrete Acid Stain Sealer.
  6. Surecrete EcoStain Water-Based Concrete Stain.

Can you stain concrete white?

32 Oz White Concrete Stain-Eco Stain. Concentrated Formula makes 1 Gal. Does not carry a sealant and should NOT be used as a STANDALONE product. UV-Stable, so as long as a sealer is applied; the colors will not fade or yellow.



Product information.

Item Weight 2 pounds
Item model number 01W

How long do concrete stains last?

With stained concrete, the concrete itself will last for many years, potentially over 100 years. However, in order for the stain to last, the floors will need to be sealed or waxed once or twice per year.

Can you color stain old concrete?

The answer is: yes, you can acid stain old concrete. The process for acid staining old concrete is not all that different from staining new concrete with a few exceptions. Below, we will walk you through how to stain old concrete and the differences from how to stain new concrete.

You might be interested:  Quick Answer: How Much Concrete In A Bag Of Sakrete?

What is the best way to color concrete?

6 ways to color concrete

  1. Integral coloring. Colorant added to concrete during mixing produces uniform color throughout the slab.
  2. Shake-on colors. Shake-on color consists of finely-ground pigments and dry cement that is “broadcast” onto freshly placed concrete.
  3. Acid Stains.
  4. Acetone dyes.
  5. Water-based dyes.
  6. Color hardener/densifiers.

Leave a Reply

Your email address will not be published. Required fields are marked *